The dimensions of the drip stand vary, depending on the rollator model used. Measured from the floor, the lowest size is between 122-132 cm and the highest 206-216 cm. The bag should hang in, towards the seat.

The dimensions of the drip stand vary, depending on the rollator model used. Measured from the floor, the lowest size is between 122-132 cm and the highest 206-216 cm. The bag should hang in, towards the seat.

When there is a need to keep the legs apart. Can give satbility and better posture. Fabric black Skai.

This armrest plate is mounted as standard on our classic 200 work chair with soft plush

This armrest plate is mounted as standard on our classic 200 work chair.

This armrest plate is mounted as standard on our classic 200 work chair.

To be mounted on the Comfort-seat to allow a closer fit to the body. Can be folded inwards or outwards when moving in and out of the chair.

The sling back can be shaped after theusers back with 5 adjustable straps under the upholster. Recommended for users with kyphosis.

A 3 -point belt to be mounted on the comfort seat. Similar to safety belt in a car..

Seat belt for the hip. In black Skai.

Bracket for crutches to be mounted on the backside on Comfort back support.

To be mounted in the combi hold when using divided leg supports, amp. support or adapters for other manufacturers leg supports. One on each side.

For users who are amputaded and extra support. To be used together with the combi hold.

Divided leg support electrically adjustable in angle. Only for work chairs with electric seat lift. Adjustable in angle by the knee and ankle with length compensation. Operated with a control box. Delivered with calf support.

Comfortable head restraint with many adjustment possibilities. Only for the comfort seat and high work chair seat. Comes complete with hold and removable pice of fabric in color black Delfi.

A hold when mounting a head support on a sling back

Hooks to be mounted on the back of the Comfort back support.

Is needed when you want to use leg supports from other manufacturers on our products. Available for most of the bigger brands. Tobe used together with the combi hold and width adjustment hold.

Increased support for the lumbar. Can be used as neck support in combination with the high version of Comfort back support.

Gives support to the outside of the thigh to prevent the legs from falling out. To be mounted on the comfort seat. Complete with hold.

Gives supports to the thighs to prevent them to fall out.

Transparent tray/table in i plexi. Complete with hold.

For users who need help with side stabilization.

Battery for DX Compact. Two is needed for each chair.
12V 50Amp

BUS station för inkoppling av flera Dynamic tillbehör.

Our standard charger for our power wheel chair DX Compact Comfort

TC Fas-8 gives 24V, 8A

Alternative joystick knobs.
These alternative knobs can be mounted on all Dynamic control boxes to adapt them to the user.
For people with trouble holding the standard grip, one of these altaernatives may be an opportunity to get a better grip and thus better control over the wheelchair.

Carer control of seat functions. Is connected into the Dynamic electronic and replacecs the menu functions of the G90T.
Note ! The electronics needs to be reprogrammed with the Wizard ! Enable "ARC enable" !

Control box G90A have two 3.5 mm teleplugs instead of the toggle switches that is standard on G90T. It also has hot keys for flashers. Controls up to 5 seat functions on the joystick. Clear symbols showing which seat function selected. Programmed with the new Wizard 5 hand programmer.

Standard control box for DX Compact. Controls up to 5 seat functions. Obvious symbols explains what seat function is activated. Is programmed with the new Wizard 5 or the hand programmer.

The new standard control box on our indoor power wheel chairs Miniflex and Flexmobil. Controls up to two seat functions. Is programmed with Wizard 5

Lights kit to be mounted on the Comfort seat.

Combined actuator and light module. Is used to control the seat functions and lights (if mounted)

(Combined Light and Actuator Module, CLAM)

Links the power from the batteries out to the motors For control box G90.

24 Volt 2x70 amp
185x125x45mm
1,4 kg

Links the power from the batteries out to the motors. For control box shark.

Wizard programming kit for PC. It’s a tool for programming the electronics of our power wheel chairs. The soft ware is free to down load from here below, but you also need a hard ware lock (dongle) and cable to connect to the wheel chair to.
Contains: soft ware Wizard 5
programming cable (USB)
hard ware lock (dongle) (USB)

Attendant control model Z. To be fitted on Comfort seat. The wheel chair is controlled by moving the comfatable handle left, right, up or down.
Comes complete with handle, back mount, and electronics.

Controls the wheel chair with a finger that is put in the hole. Proportional!

Used together with control box SCR and then you can get full environmental control. Anything that is controlled by IR you can program into the IRIS. You build up menus in the SCR that is connected to the programmed functions in the IRIS. You need the Wizard 3.1b to program the SCR and the hand controller to program the IRIS.

To be used together with IRIS. Makes it possible to control your PC with the joystick from the wheel chair. Connected to a free serial port on your PC ( not MAC)

A very small and light touch proportional joystick. With a stroke of +/- 10 mm and a force of 6g it is very suitable for weak users.

Separate joystick that can work together with the standard control box. Could be a solution for users who needs to alternate between left and right hand.

When you want to control the wheel chair with sif and puff with your mouth.
Is programmed with Wizard 3.1b

When there is a need to keep the legs apart. Can give satbility and better posture. Fabric black Skai.

Armrest plate designed for users who are hemiplegics. Fabric black Skai.

This armrest plate is mounted as standard on our classic 200 work chair with soft plush

This armrest plate is mounted as standard on our classic 200 work chair.

This armrest plate is mounted as standard on our classic 200 work chair.

Arm support rods for the height adjustment. Available in a numbre of types. Delivered without arm support plate.

Arm support foldable backwards. Makes side transfers easier for the user when getting in and out of the chair.

The sling back can be shaped after theusers back with 5 adjustable straps under the upholster. Recommended for users with kyphosis.

Seat belt for the hip. In black Skai.

For users who have problems to carry out the normal brake move with the lever. The brakes are activated with a controlbox in the hand.

For assistant maneuvering of the brake.

To be mounted in the combi hold when using divided leg supports, amp. support or adapters for other manufacturers leg supports. One on each side.

For users who are amputaded and extra support. To be used together with the combi hold.

The head restraint designed to support head and neck. It also supports the skull behind the ears to prevent the head from falling to one side. Adjustable in height, depth and angle.

A hold when mounting a head support on a sling back

Is needed when you want to use leg supports from other manufacturers on our products. Available for most of the bigger brands. Tobe used together with the combi hold and width adjustment hold.

Recommended when you want to use a separate seat cushions to superimpose the plane seat. Ordered by dimensions!

Push handle to be mounted on the chassis. Adjusteble in height and angle.

For users who needs help to slant the seat electrically. Makes it easier to get in and out of the chair. Activated with the control box. Seat angle (backwards -6° to +18° forwards), Seat tilt slant the seat unit (backwards -20° to +10° forwards)

Protects the upholster from worn and incontinence.

For users who are stiff in there hip and for those who are amputated.

Transparent tray/table in i plexi. Complete with hold.

Battery 12V 3,2A. One battery is needed for the work chair

Standard charger for our work chairs.

Input: 220-240V AC, Max 0,15A, 50-60Hz
Output: 13,8V DC, Max 1,5A
IP 54

When there is a need to keep the legs apart. Can give satbility and better posture. Fabric black Skai.

Armrest plate designed for users who are hemiplegics. Fabric black Skai.

This armrest plate is mounted as standard on our classic 200 work chair with soft plush

This armrest plate is mounted as standard on our classic 200 work chair.

This armrest plate is mounted as standard on our classic 200 work chair.

Arm support rods for the height adjustment. Available in a numbre of types. Delivered without arm support plate.

Arm support foldable backwards. Makes side transfers easier for the user when getting in and out of the chair.

The sling back can be shaped after theusers back with 5 adjustable straps under the upholster. Recommended for users with kyphosis.

Seat belt for the hip. In black Skai.

For assistant maneuvering of the brake.

To be mounted in the combi hold when using divided leg supports, amp. support or adapters for other manufacturers leg supports. One on each side.

For users who are amputaded and extra support. To be used together with the combi hold.

The head restraint designed to support head and neck. It also supports the skull behind the ears to prevent the head from falling to one side. Adjustable in height, depth and angle.

A hold when mounting a head support on a sling back

Is needed when you want to use leg supports from other manufacturers on our products. Available for most of the bigger brands. Tobe used together with the combi hold and width adjustment hold.

Recommended when you want to use a separate seat cushions to superimpose the plane seat. Ordered by dimensions!

For users who needs help to slant the seat electrically. Makes it easier to get in and out of the chair. Activated with the control box. Seat angle (backwards -6° to +18° forwards), Seat tilt slant the seat unit (backwards -20° to +10° forwards)

Protects the upholster from worn and incontinence.

For users who are stiff in there hip and for those who are amputated.

Transparent tray/table in i plexi. Complete with hold.

Battery 12V 3,2A. One battery is needed for the work chair

Standard charger for our work chairs.

Input: 220-240V AC, Max 0,15A, 50-60Hz
Output: 13,8V DC, Max 1,5A
IP 54

Armrest plate designed for users who are hemiplegics. Fabric black Skai.

To be mounted in the combi hold when using divided leg supports, amp. support or adapters for other manufacturers leg supports. One on each side.

For users who are amputaded and extra support. To be used together with the combi hold.

Is needed when you want to use leg supports from other manufacturers on our products. Available for most of the bigger brands. Tobe used together with the combi hold and width adjustment hold.

Standard charger for our work chairs.

Input: 220-240V AC, Max 0,15A, 50-60Hz
Output: 13,8V DC, Max 1,5A
IP 54

When there is a need to keep the legs apart. Can give satbility and better posture. Fabric black Skai.

Armrest plate designed for users who are hemiplegics. Fabric black Skai.

This armrest plate is mounted as standard on our classic 200 work chair with soft plush

This armrest plate is mounted as standard on our classic 200 work chair.

This armrest plate is mounted as standard on our classic 200 work chair.

Arm support rods for the height adjustment. Available in a numbre of types. Delivered without arm support plate.

Arm support foldable backwards. Makes side transfers easier for the user when getting in and out of the chair.

Forma active back gives in combination with the standard back an active seating with good support and you keep the mobility of the upper part of the torso. Since it is divided in two it can be shaped after the users back.

Forma comfort back gives in combination with the standard back a comfortable support for all the back. Since it it’s divided into two it can be shaped after the users back.

The sling back can be shaped after theusers back with 5 adjustable straps under the upholster. Recommended for users with kyphosis.

Seat belt for the hip. In black Skai.

For assistant maneuvering of the brake.

To be mounted in the combi hold when using divided leg supports, amp. support or adapters for other manufacturers leg supports. One on each side.

For users who are amputaded and extra support. To be used together with the combi hold.

The head restraint designed to support head and neck. It also supports the skull behind the ears to prevent the head from falling to one side. Adjustable in height, depth and angle.

A hold when mounting a head support on a sling back

Is needed when you want to use leg supports from other manufacturers on our products. Available for most of the bigger brands. Tobe used together with the combi hold and width adjustment hold.

Is mounted at the front edge under the seat to be able to fit the chair leg supports, footplate amp. support, abductor and adapters for other manufacturers leg supports.

Recommended when you want to use a separate seat cushions to superimpose the plane seat. Ordered by dimensions!

Push handle to be mounted on the chassis. Adjusteble in height and angle. Fits all models except Euroflex Basic.

For users who needs help to slant the seat electrically. Makes it easier to get in and out of the chair. Activated with the control box. Seat angle (backwards -6° to +18° forwards), Seat tilt slant the seat unit (backwards -20° to +10° forwards)

Protects the upholster from worn and incontinence.

For users who are stiff in there hip and for those who are amputated.

Gives supports to the thighs to prevent them to fall out.

Transparent tray/table in i plexi. Complete with hold.

Battery 12V 3,2A. One battery is needed for the work chair

Standard charger for our work chairs.

Input: 220-240V AC, Max 0,15A, 50-60Hz
Output: 13,8V DC, Max 1,5A
IP 54

ABC abductor.

This armrest plate is mounted as standard on our classic 200 work chair with soft plush

This armrest plate is mounted as standard on our classic 200 work chair.

Arm support rods for the height adjustment. Available in a numbre of types. Delivered without arm support plate.

Arm support rods for the height adjustment. Available in a numbre of types. Delivered without arm support plate.

Arm support foldable backwards. Makes side transfers easier for the user when getting in and out of the chair.

For assistant maneuvering of the brake.