Flexmobil i6 SitRite

Product information
Accessories
Documentation
Images / media

With the Flexmobil i6 SitRite, we lift mobile aids to to a new level. The Flexmobil i6 SitRite is a power wheelchair for indoor use that provides a new freedom of movement at home, at work and at play. The chair is equipped with an innovative chassis with a more generous seat height and lower noise level. You are seen and heard - not the chair.

Chassis - Flexmobil i6

With the new i6 chassis, it is easy to "sit close to the at floor" or "stand up and work". The Flexmobil i6 has generous mini and max positions and is available with two different actuators.

For us, it is all about equality. So you, as a child, can sit and play at the same level as your friends. And so you, as an adult, can vary your working position easily in the activity based office or perform everyday activities at home.

With the drive wheels placed in the middle, the chair is very easy to drive. The chair turns or its own axis and only needs a small turning space.

Technical data

Class	A
Chassis, width	57 cm
Chassis, length	80 cm
Total weight	98 kg
User weight, max.	150 kg
Turning radius	96 cm
Max. driving time	4 km/h
Max. driving time	8,5 h
Electronics	Dynamic/PG
Obstacle climbing	max. 3 cm

Seat system - SitRite

Seat

The SitRite seat's advantages are hidden beneath the surface in its double foam cushioning. The two parts have different densities and are formed to give the firmness and cushioning the back and thighs need. The harder base foam provides the positioning characteristics, which is to say helps hold the pelvis in a good position. The softer surface foam evens out pressure distribution and is denser under the backside than under the thighs. The form and density combine to provide comfort and stability and facilitate aspects such as balance, backbone posture and hand control.

The seat consists of:

Seat cavity
Anatomically formed femur support
Side support for the thighs
Side support for the pelvis
Space for protruding sacrum and coccyx
Pressure distribution properties

Back

The SitRite back has an ergonomic form that supports most of the trunk without impairing arm movement. Pressure is distributed over a large area, and the trunk is also supported at the sides, which enhances comfort, increases stability and reduces tiredness when the user has a reduced sitting capability. When the trunk is stable, the user is better able to control head and hand movement.

The back consists of:

A rounded form to provide sideways support
Support for the upper part of the ileum, backwards and sideways
Space for the sacrum
individually adjustable support for the curve of the back (option)
free space for arm movement
upper back support

Technical data

Seat, (width x depth)	40x40, 40x45, 45x45, 45x50, 50x50 cm
Seat width (between the armrests)	38-56 cm
Seat depth	40-59 cm
Seat height (height to the seat's lower side)	36-61, 43-83 cm
Seat tilt, electrical, crank & turnbuckle	-19 to 20°
Back support height, adjustable	37-62 cm
Back (width x height)	37x43, 42x45, 47x47 cm
Back angle	30°
Upholstery	Black Atlantic
Armrest height, adjustable	0-26 cm
Armrest platform	31x8x3 cm

Seat height is adjustment is electric and is available in low or high seat height options. Both are listed one after the other in the technical data in the order "low, high".

Configuration

For more information about different configurations of this chair, check out the test report below.

There are no related documents

Accessories:

Show all accessory specifications