SvenskaEnglish
Eurovema Logo
Share

Product groups

Please check options you want to display

Category:
Adult
Child
Applications:
Indoor
Indoor/Outdoor

Please check options you want to display. You can always change your settings in the Filters menu under the top menu. Press 'OK' to save.

We use cookies for technical reasons.

Category:
Vuxen Barn
Applications:
Inne Inne/Ute
SvenskaEnglish

Products /  Power wheelchairs /  Miniflex Classic

Miniflex Classic

Miniflex Classic is a power wheelchair for indoor use. Developed to give good manouverbility. Small and compact with an electric seat lift as standard. Miniflex has a small turning radius and it's front driven and the back wheels are joint fixed in the chassis to give full contact with the surface. The seat unit has an anatomical shape for best comfort and seating position.

euroflex

Miniflex Classic


Chassis - Miniflex

Front-wheel drive chassis for indoor use. The market's most compact chassis is no larger than a manual work chair. Versatile and easily manoeuvred, with the compact design that gets you close to tables or work surfaces. The jointed rear axle ensures that the rear wheel pair is always in contact with the floor.

Miniflex chassis

Technical data

Class A
Chassis, width 57 cm
Chassis, length 72 cm
Total weight 60 kg
User weight, max. 140 kg
Turning radius 120 cm
Max. speed 4 km/h
Max. range approx. 15 km
Electronics Dynamic/PG
Obstacle climbing 3 cm
Battery 12V/18Ah

Seat system - Classic

Classic is a seat system designed for users with reduced walking capacity with moderate impairment in trunk stability. The seat is slightly rounded with a so-called seat cavity. The back support provides good support in the small of the back and is available in various sizes. The ergonomically designed seat unit provides both the correct posture and comfort.

Classic seat system

Technical data

Seat, (width x depth) 40x40, 40x43, 40x46, 43x43, 46x46, 49x51 cm
Back, external dimensions (width x height) 35x30, 35x44, 40x30, 40x44 cm
Seat width (between the armrests) 40-59 cm
Seat height, electrical (height to the seat's upper side) continuously adjustable 49-74 + 5 cm 43-61 + 5 cm
Seat, Coxit (width x depth) 45x45, 50x50 cm
Seat depth 40-49 cm, adjustable
Tilt, electrical 20º forwards 0° backwards
Back support, height 37-54 cm, adjustable
Upholstery Black Atlantic
Armrest, height 0-26 cm, adjustable
Armrest platform 30x6 cm, polyurethane with plush insert

Configuration

For more information about different configurations of this chair, check out the test report below.

Order Guide

404.2kB (pdf)

Number of order: 1



Accessories

Miniflex Classic - Accessory

When there is a need to keep the legs apart. Can give satbility and better posture. Fabric black Skai.

Assembly Instructions
Download (SE)

Article Art. nbr
Abductor Classic and Comfort 224047-4800


Assembly Instructions
Download (SE)

Article Art. nbr
Arm rest plate - Comfort 30x8x3 cm soft padding 624002-4004


Assembly Instructions
Download (SE)

Article Art. nbr
Arm rest plate Froli 624001-4016


Armrest plate designed for users who are hemiplegics. Fabric black Skai.

Assembly Instructions
Download (SE)
Download (UK)

Article Art. nbr
Arm rest plate hemiplegia 224099-4070


This armrest plate is mounted as standard on our classic 200 work chair with soft plush

Assembly Instructions
Download (SE)

Article Art. nbr
Arm rest plate polyurethane 624001-4060


This armrest plate is mounted as standard on our classic 200 work chair.

Assembly Instructions
Download (SE)

Article Art. nbr
Arm rest plate soft 30 cm 624001-4004-S


This armrest plate is mounted as standard on our classic 200 work chair.

Assembly Instructions
Download (SE)

Article Art. nbr
Arm rest plate soft 40 cm 624001-4007


Arm support rods for the height adjustment. Available in a numbre of types. Delivered without arm support plate.

Assembly Instructions
Download (SE)

Article Art. nbr
arm support rod standard 624001-4010K
arm support rod extra long 624101-4140
Arm support - height adjustment



Arm support foldable backwards. Makes side transfers easier for the user when getting in and out of the chair.

Assembly Instructions
Download (SE)

Article Art. nbr
arm support swing away right 269101-4000H
arm support swing away left 269101-4000V
Arm support swing away




Article Art. nbr
Back support 16x30 cm air-filled 7SVANKSTOD


The sling back can be shaped after theusers back with 5 adjustable straps under the upholster. Recommended for users with kyphosis.

Assembly Instructions
Download (SE)

Article Art. nbr
Complete back support Slingback for Classic, Forma and SitRite 224001-6001



Article Art. nbr
Belt 4-point waist belt adult 624070-4400


Seat belt for the hip. In black Skai.


Article Art. nbr
Hip belt 224047-4400
Belt - hip




Article Art. nbr
Head restraint SitRite 804000-2010


To be mounted in the combi hold when using divided leg supports, amp. support or adapters for other manufacturers leg supports. One on each side.

Assembly Instructions
Download (SE)

Article Art. nbr
Foot plate complete 224001-2019



Article Art. nbr
Foot plate complete and part 259001-2004



Article Art. nbr
Foot plate complete, electric 269001-2000



Article Art. nbr
Foot rail complete 224001-2035


For users who are amputaded and extra support. To be used together with the combi hold.

Assembly Instructions
Download (SE)

Article Art. nbr
Footrest amputation right 224001-4100H
Footrest amputation left 224001-4100V


Divided leg support electrically adjustable in angle. Only for work chairs with electric seat lift. Adjustable in angle by the knee and ankle with length compensation. Operated with a control box. Delivered with calf support.

Assembly Instructions
Download (SE)

Article Art. nbr
Footrest left 299001-8000H
Footrest left 299001-8000V



Article Art. nbr
Footrest right 224001-2300V
Footrest left 224001-2300H



Article Art. nbr
Footrest electric left 299001-9000V
Footrest electric right 299001-9000H


Assembly Instructions
Download (SE)

Article Art. nbr
Head restraint Comfort, Black dot piece 299033-4700


The head restraint designed to support head and neck. It also supports the skull behind the ears to prevent the head from falling to one side. Adjustable in height, depth and angle.


Article Art. nbr
Head restraint Forma complete, black (cushion+hold) 804000-2011


A hold when mounting a head support on a sling back


Article Art. nbr
Head support hold sling back 299001-6003
Head support - hold - sling back



Is needed when you want to use leg supports from other manufacturers on our products. Available for most of the bigger brands. Tobe used together with the combi hold and width adjustment hold.

Assembly Instructions
Download (SE)

Article Art. nbr
Etac adapter 224001-2104H/V
Leg support - adapters



Assembly Instructions
Download (SE)
Download (UK)

Article Art. nbr
Oxygen Cylinder Holder Work Chair 299001-9100


Recommended when you want to use a separate seat cushions to superimpose the plane seat. Ordered by dimensions!


Article Art. nbr
Plane seat, customised 624000-3000


Protects the upholster from worn and incontinence.


Article Art. nbr
40x40 cm, black 800401-4040
40x45 cm, black 800401-4045
45x45 cm, black 800401-4545
50x50 cm, black 800401-5050
45x45 cm, coxit black 800411-4545
Seat cover - inc. protected Forma



Transparent tray/table in i plexi. Complete with hold.

Assembly Instructions
Download (SE)

Article Art. nbr
Tray plexi adult, with attachment 224001-4900



Article Art. nbr
Trunk support reinforcement SitRite 624001-4700


Miniflex Classic - Electronics

BUS station för inkoppling av flera Dynamic tillbehör.


Article Art. nbr
Battery DX Compact 7DX-SKT-X4
Battery - DX Compact Comfort



Battery for Miniflex . Two is needed for each chair.
12V 16Amp


Article Art. nbr
Battery Minflex 7YA17-12
Battery - Miniflex




Article Art. nbr
Buddy Button 7PG-D49939
R-net-Omni 7PG-R-NET OMNI


Alternative joystick knobs.
These alternative knobs can be mounted on all Dynamic control boxes to adapt them to the user.
For people with trouble holding the standard grip, one of these altaernatives may be an opportunity to get a better grip and thus better control over the wheelchair.

Assembly Instructions
Download (SE)

Article Art. nbr
Joystick KIT 7DX-JS-KIT
Control box - joystick KIT



Carer control of seat functions. Is connected into the Dynamic electronic and replacecs the menu functions of the G90T.
Note ! The electronics needs to be reprogrammed with the Wizard ! Enable "ARC enable" !

Assembly Instructions
Download (SE)

Article Art. nbr
Joystick ARC5, carer control 7DX-ARC5


Control box G90A have two 3.5 mm teleplugs instead of the toggle switches that is standard on G90T. It also has hot keys for flashers. Controls up to 5 seat functions on the joystick. Clear symbols showing which seat function selected. Programmed with the new Wizard 5 hand programmer.


Article Art. nbr
Joystick G90A with telecom sockets for external buttons 7DX-REMG90A


Standard control box for DX Compact. Controls up to 5 seat functions. Obvious symbols explains what seat function is activated. Is programmed with the new Wizard 5 or the hand programmer.


Article Art. nbr
Joystick G90T with toggle switch 7DX-REMG90-T



Article Art. nbr
Joystick PG VR2 7PG-VR2 JSM-A



Article Art. nbr
Joystick PG with colorscreen 7PG-R-NETCJSM-sw



Article Art. nbr
Joystick PG with LED 7PG-R-NETLED JSM



Article Art. nbr
Joystick Rem550 for Dx2 electronics 7DX2-REM550


The new standard control box on our indoor power wheel chairs Miniflex and Flexmobil. Controls up to two seat functions. Is programmed with Wizard 5


Article Art. nbr
Joystick shark 7DX-DK-REMD11


Combined actuator and light module. Is used to control the seat functions and lights (if mounted)

(Combined Light and Actuator Module, CLAM)

Assembly Instructions
Download (SE)
Download (SE)

Article Art. nbr
CLAM module 7DX-CLAM
Modules - CLAM module G90



Links the power from the batteries out to the motors For control box G90.

24 Volt 2x70 amp
185x125x45mm
1,4 kg


Article Art. nbr
Power module G90 7DX2-PMA70


Links the power from the batteries out to the motors. For control box shark.


Article Art. nbr
Power module shark 7DX-DK-PMB21


Wizard programming kit for PC. It’s a tool for programming the electronics of our power wheel chairs. The soft ware is free to down load from here below, but you also need a hard ware lock (dongle) and cable to connect to the wheel chair to.
Contains: soft ware Wizard 5
programming cable (USB)
hard ware lock (dongle) (USB)


Article Art. nbr
Wizard 5 - programming - kit 7DX-WIZ-OEM USB
Programming - Wizard Kit




Article Art. nbr
ACU1 joystick 7DX-ACU1


Controls the wheel chair with a finger that is put in the hole. Proportional!


Article Art. nbr
Finger control 7DX-RJM-VIC


Used together with control box SCR and then you can get full environmental control. Anything that is controlled by IR you can program into the IRIS. You build up menus in the SCR that is connected to the programmed functions in the IRIS. You need the Wizard 3.1b to program the SCR and the hand controller to program the IRIS.


Article Art. nbr
IRIS IR-transmitter 7DX-IRIS
Secondary remotes - IRIS



To be used together with IRIS. Makes it possible to control your PC with the joystick from the wheel chair. Connected to a free serial port on your PC ( not MAC)


Article Art. nbr
IRIS IR-receiver PCMR 7DX-PCMR
Secondary remotes - IRIS reciever



A very small and light touch proportional joystick. With a stroke of +/- 10 mm and a force of 6g it is very suitable for weak users.


Article Art. nbr
Mini joystick 7DX-RJM-MEC


Separate joystick that can work together with the standard control box. Could be a solution for users who needs to alternate between left and right hand.


Article Art. nbr
RJM, external 7DX-RJM


When you want to control the wheel chair with sif and puff with your mouth.
Is programmed with Wizard 3.1b


Article Art. nbr
mouth piece 7DX-9977
electronic module SNP 7DX-SNP
Secondary remotes - Sif and puff



Documentation


Product Catalogue

22.8MB (pdf)

Number of order: 1

Brochures

628.9kB (pdf)

Number of order: 1

Manuals

448.4kB (pdf)

Number of order: 1

Order Guide

404.2kB (pdf)

Number of order: 1

Exploded views / Spare parts

579.7kB (pdf)

Number of order: 1

Program

8.1MB (exe)

Number of order: 1

3.8MB (exe)

Number of order: 1

3.2MB (zip)

Number of order: 1

349.9kB (zip)

Number of order: 1

4.1MB (zip)

Number of order: 1

Assembly Instructions - Accessories

4.0MB (pdf)

Number of order: 1

300.8kB (pdf)

Number of order: 1



Images / media

Search for images
   

Results are filtered at: 

Show page of 1

 
  • br00001780.jpg

    br00001780.jpg

    Miniflex Classic

    05/05/2011


    Included in gallery:

    Miniflex Classic

  • br00001869.jpg

    br00001869.jpg

    Manual seat tilting for Euroflex Classic

    12/05/2011


    Included in gallery:

    Miniflex Classic

  • br00001711.jpg

    br00001711.jpg

    Euroflex Classic Low Back

    05/05/2011


    Included in gallery:

    Miniflex Classic

  • br00001712.jpg

    br00001712.jpg

    Euroflex Classic High Back

    05/05/2011


    Included in gallery:

    Miniflex Classic

 

To download a high resolution image click on the image and select 'Download high-res'.
(NOTE! All pictures can not be downloaded)



logo

Eurovema Mobility AB
Baldersvägen 38
SE-332 35 Gislaved
Sweden

Phone: +46-371-39 01 00
E-mail:info@eurovema.se
print  |  sitemap